neighbor unsuppress-map

Removes route suppression from BGP neighbor routes when those routes have been suppressed as a result of aggregation. All routes matching route-map rules are unsuppressed.

Syntax

neighbor { ip-address | ipv6-address | peer-group-name } unsuppress-map string

no neighbor { ip-address | ipv6-address | peer-group-name } unsuppress-map string

Command Default

This feature is disabled.

Parameters

ip-address: IPv4 address of the neighbor.
ipv6-address: IPv6 address of the neighbor
peer-group-name: Peer group name configured by the neighbor peer-group-name command.
string: Name of the route map. Range is from 1 through 63 ASCII characters.

Modes

BGP address-family IPv4 unicast configuration mode

BGP address-family IPv6 unicast configuration mode

BGP address-family IPv4 unicast VRF configuration mode

BGP address-family IPv6 unicast VRF configuration mode

Usage Guidelines

Use the no form of the command to restore the defaults.

Examples

The following BGP4 example removes route suppression for the default VRF.

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv4 unicast
device(config-bgp-ipv4u)# neighbor 10.11.12.13 unsuppress-map myroutemap

The following BGP4+ example removes route suppression for VRF instance "red".

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv6 unicast
device(config-bgp-ipv6u-vrf)# neighbor 2001:2018:8192::125 unsuppress-map myroutemap

The following BGP4+ example removes route suppression for address family IPv6 unicast of default VRF.

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv6 unicast
device(config-bgp-ipv6u)# neighbor 10.11.12.13 unsuppress-map myroutemap