show bgp evpn l2route unreachable

Displays route information about BGP EVPN Layer 2 routes whose destinations are unreachable through any path in the BGP EVPN route table.

Syntax

show bgp evpn l2route unreachable type { igmp-join-sync | igmp-leave-sync}

Parameters

type: Specifies the type of route.
igmp-join-sync: Specifies Join Sync routes.
igmp-leave-sync: Specifies Leave Sync routes.

Modes

Privileged EXEC mode

Example

This example shows bgp evpn l2route unreachable.

SLX-MH1# show bgp evpn l2route unreachable
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
       S:SUPPRESSED F:FILTERED s:STALE
       Prefix             Next Hop        MED        LocPrf     Weight RPKI State Status
1      IMR:[101][IPv4:2.2.2.2]
                          2.2.2.2          none      100        0      E
         AS_PATH: 200 100
         L2 Label: 101
2      IMR:[102][IPv4:2.2.2.2]
                          2.2.2.2          none      100        0      E
         AS_PATH: 200 100
         L2 Label: 102
3      ESR:[01.609c9f.871e00.000100][IPv4:2.2.2.2]
                          2.2.2.2          none      100        0      E
         AS_PATH: 200 100