debug arp packet buffer
Configures or clears the ARP-packet buffer.
Syntax
debug arp packet buffer
all
no debug arp packet buffer
all
debug arp packet buffer
{
circular
|
linear
}
packet-count
num-packets
[
vrf
vrf-name
]
debug arp packet buffer
clear
[
vrf
vrf-name
]
debug arp packet buffer
interface
{
ethernet
slot
/
port
|
port-channel
number
|
ve
ve-id
}
[
rx
|
tx
]
no debug arp packet buffer
interface
{
ethernet
slot
/
port
|
port-channel
number
|
ve
ve-id
}
[
rx
|
tx
]
Parameters
-
all
- Specifies all ARP-packet buffers.
-
circular
- Specifies circular buffer type.
-
linear
- Specifies linear buffer type.
-
packet-count
num-packets
- Specifies a value from 64 through 2056.
-
clear
- Clears the buffer contents.
-
vrf
vrf-name
- Specifies the name of the VRF instance. If this option is not used, details for the default VRF are shown in the output.
-
interface
- Specifies an Ethernet or VE interface.
-
ethernet
- Specifies a physical Ethernet interface.
- slot
- Specifies a valid slot number. For devices
that do not support linecards, specify 0.
- port
- Specifies a valid port number.
-
port-channel
number
- Specifies a port-channel interface.
-
ve
ve-id
- Specifies a virtual ethernet (VE) interface.
- rx
- Specifies whether to capture only transmitted packets.
-
tx
- Specifies whether to capture received packets.
Modes
Privileged EXEC mode
Usage Guidelines
Diagnostic commands are developed and intended
for specialized troubleshooting. Work closely with Extreme Networks technical
support when running debug or show
system internal commands and interpreting their results.
If neither
rx nor
tx are specified, both transmitted and received packets are captures.
To disable ARP packet capture on a specified interface, use the
no debug dhcp packet buffer interface command.
To disable ARP packet capture on all interfaces, use the
no debug dhcp packet buffer all command.
Examples
The following command enables ARP packet capture for transmitting data on Ethernet interface 1/5.
device# debug arp packet buffer interface ethernet 1/5 tx
The following command disables ARP packet capture on all interface.
device# no debug arp packet buffer all
