Disables the shutting down of an interface (Ethernet or port-channel), a VLAN VXLAN tunnel, or a bridge domain (BD) VXLAN tunnel as a result of the loop detection (LD) protocol.
This feature is disabled.
Interface subtype configuration mode (Ethernet or port-channel)
VLAN configuration mode
Use the no form of this command. to revert to default behavior. (LD protocol shuts down the interface.)
The following example disables the shutdown of an Ethernet interface as a result of LD protocol.
device# configure terminal device(config)# interface ethernet 2/6 device(conf-if-eth-2/6)# loop-detection shutdown-disable
The following example reverts to default behavior.
device# configure terminal device(config)# interface ethernet 2/6 device(conf-if-eth-2/6)# no loop-detection shutdown-disable
The following example disables the shutdown of a VLAN VXLAN tunnel.
device# configure terminal device(config)# vlan 20 device(config-vlan-20)# loop-detection shutdown-disable