efa deploy
Deploys Extreme Fabric Automation (EFA)
on TPVM. EFA can be deployed in one of Graphics, No Graphics or
Non Interactive modes.
Syntax
efa
deploy
[
--graphics
|
nographics
|
non-interactive
]
efa
deploy
--graphics
{
yes
|
no
[
[
with-rollback
]
slx-peer-ip
ipv4-address
slx-peer-user
user-name
slx-peer-password
user-password
]
}
efa
deploy
nographics
[
with-rollback
]
slx-peer-ip
ipv4-address
slx-peer-user
user-name
slx-peer-password
user-password
efa
deploy
non-interactive
{
multi-node
|
single-node
|
with-rollback
}
efa
deploy
non-interactive
multi-node
package
path-to-efa-package-location
{
management-ip
|
peer-node
|
replacement-ip
}
efa
deploy
non-interactive
multi-node
package
path-to-efa-package-location
management-ip
sub-interface-name
sub-interface-name
sub-vlan-id
sub-vlan-id
external-subnet
ipv4-address/mask
[
peer-node
|
replacement-ip
]
efa
deploy
non-interactive
multi-node
package
path-to-efa-package-location
peer-node
peer-tpvm-node-ipv4-address
vip4
virtual-ipv4-address
[
vip6
virtual-ipv6-address
]
[
management-ip
|
replacement-ip
]
efa
deploy
non-interactive
multi-node
package
path-to-efa-package-location
replacement-ip
replacement-ipv4-address
[
management-ip
|
peer-node
]
efa
deploy
non-interactive
[
with-rollback
]
single-node
package
path-to-efa-package-location
management-ip
sub-interface-name
sub-interface-name
sub-vlan-id
sub-vlan-id
external-subnet
ipv4-address/mask
efa
deploy
non-interactive
with-rollback
slx-peer-ip
ipv4-address
slx-peer-user
user-name
slx-peer-password
user-password
no efa deploy
{
--graphics
|
nographics
}
Parameters
-
--graphics
-
-
yes
- Deploy EFA in legacy mode with
graphics support.
-
no
- Deploy EFA in legacy mode without
graphics support.
-
nographics
- Deploy EFA using the no graphics mode.
-
non-interactive
- Deploy EFA in the non interactive mode.
In this mode EFA will be installed without any human interaction.
-
with-rollback
- Enable rollback of deployment when
deployment of EFA fails.
-
slx-peer-ip
ipv4-address
- The IPv4 address of the SLX peer
device.
-
slx-peer-user
user-name
- The user name of the account used to
access the peer SLX device.
-
slx-peer-password
user-password
- The password for the user account
provided in the slx-peer-user field.
-
multi-node
- Use this keyword when deploying EFA to
more than one node.
-
package
path-to-efa-package-location
- The complete path to the EFA packager
bundle.
-
peer-node
peer-tpvm-node-ipv4-address
- The IPv4 address of the peer TPVM node.
-
vip4
virtual-ipv4-address
- The virtual IPv4 address of the peer
TPVM node.
-
vip6
virtual-ipv6-address
- The virtual IPv6 address of the peer
TPVM node. This is an optional parameter.
-
management-ip
- Use to configure additional Management
IP related parameters.
-
sub-interface-name
sub-interface-name
- Configure the sub-interface within the
management interface.
-
sub-vlan-id
sub-vlan-id
- Configure the sub VLAN ID for the
management interface.
-
external-IP
ipv4-address/mask
- The IPv4 address and MASK for the
external IP used to access the management interface.
-
replacement-ip
replacement-IP
-
IP address of the peer node that will replace a faulty node in a Multi-Node
deployment.
-
single-node
- Deploy EFA to a single node.
Modes
Privileged EXEC mode
Usage Guidelines
The no form of this command removes a deployed EFA instance. You can choose between using the Graphics mode or the No Graphics mode.
Examples
The following example shows deploying or upgrading EFA on a Single node.
efa deploy non-interactive single-node package /efaboot/efa-2.7.0-16.tar.gz
Example
The following example shows deploying or upgrading EFA on Multiple nodes.
efa deploy non-interactive multi-node package /efaboot/efa-2.7.0-16.tar.gz peer-node 10.20.246.102 vip4 10.20.246.103
Example
The following example shows Multi node upgrade with replacement of a failed node.
efa deploy non-interactive multi-node package /efaboot/efa-2.7.0-16.tar.gz replacement-ip 10.200.246.155
