Enables the bypass LSP.
The default value is disabled.
MPLS router bypass LSP configuration mode
Enable the bypass LSP only after configuring the to-address and exclude-interface.
The no form of the command disables the bypass LSP.
MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.
The following example enables the bypass LSP with the name my-bypass-lsp.
device# configure terminal device(config)# router mpls device(config-router-mpls)# bypass-lsp my-bypass-lsp device(config-router-mpls-bypass-lsp-my-bypass-lsp)# enable