show mvrp attributes

Displays the VLAN information and MVRP FSM states for each VLAN including the port state for all or specific MVRP-enabled Ethernet or port-channel interfaces.

Syntax

show mvrp attributes [ interface {ethernet slot/port | port-channel number } ] [ vlan ID ]

Parameters

interface

Displays the MVRP information for a specific MVRP-enabled interface.

ethernet slot/port: Specifies an Ethernet interface.

port-channel number: Specifies the port-channel interface.

vlan ID

Specifies the VLAN ID.

Modes

Privileged EXEC mode

Usage Guidelines

This feature is supported on the SLX 9250, SLX 9540, SLX 9640, SLX 9740, Extreme 8720, and Extreme 8820 devices.

The show mvrp attributes command without any options displays the VLAN information and MVRP FSM states for each VLAN for all MVRP-enabled Ethernet and port-channel interfaces.

Output

The show mvrp attributes command displays the following information:


Output field	Description
Port/Port-Channel	MVRP Ethernet or port-channel interface
State	State of the port: Forwarding, Disabled, or Blocking
VLAN	VLAN ID
Registrar State	IN—Registered LV—Leave-all MT—Empty
Registrar Mgmt	Normal—Dynamically added Fixed—Statically added Forbidden—Forbidden VLAN
Applicant State	Applicant record for each attribute; whether it has been actively making a declaration, or has been passive.

Examples

The following example displays MVRP attributes for all interfaces.

device# show mvrp attributes
Port : eth0/17   State : Disabled
-----------------------------------------------------------------------------
VLAN       Registrar            Registrar            Applicant               
           State                Mgmt                 State                   
-----------------------------------------------------------------------------
Port : eth0/5    State : Forwarding
-----------------------------------------------------------------------------
VLAN       Registrar            Registrar            Applicant               
           State                Mgmt                 State                   
-----------------------------------------------------------------------------
1          In                   Fixed                Quiet Active            
5          Empty                Normal               Quiet Active            
10         In                   Fixed                Quiet Active            
Port : po10      State : Forwarding
-----------------------------------------------------------------------------
VLAN       Registrar            Registrar            Applicant               
           State                Mgmt                 State                   
-----------------------------------------------------------------------------
1          In                   Fixed                Quiet Active            
5          In                   Normal               Very Anxious Observer   
10         Empty                Normal               Quiet Active

The following example displays MVRP attributes for a specified VLAN.

device# show mvrp attributes vlan 10          
---------------------------------------------------------------------------------------
PORT            VLAN       Registrar            Registrar            Applicant         
                           State                Mgmt                 State               
---------------------------------------------------------------------------------------
eth0/5          10         In                   Fixed                Quiet Active          
po10            10         Empty                Normal               Quiet Active