Configures the network type for the Intermediate System-to-Intermediate System (IS-IS) interface as point-to-point.
Disabled.
Interface subtype configuration mode
IS-IS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.
The no form of the command removes the configured point-to-point network type.
The following example configures a network type of point-to-point for an Ethernet interface.
device#configure terminal device(config)# interface ethernet 2/2 device(conf-if-eth-2/2)# isis point-to-point