dscp (QoS)

Defines the DSCP-to-EXP values for an MPLS QoS DSCP-to-EXP mutation map.

Syntax

dscp dscp-value to exp exp-value ]
no dscp dscp-value

Command Default

The default DSCP value.

Parameters

dscp-value
Specifies the DSCP value.
exp exp-value
Specifies the EXP value.

Modes

DSCP-EXP configuration mode

Usage Guidelines

Use the no form of the command to reset the DSCP value.

MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.

Examples

The following example defines the DSCP-to-EXP mutation map. 

device# configure terminal
device(config)# qos-mpls map dscp-exp dscpExpMap
device(dscp-exp-dscpExpMap)# dscp 0 to exp 7
9038039-00 Rev AA