start (Y1731)

Configure the start time.

Syntax

start at hh:mm:ss daily

start after hh:mm:ss daily

no start

Parameters:

at: Spcifies the time to start at.

hh:mm:ss: Specifies the time in hour, minute, and second format.

after: Specifies the measurement interval in minutes.

daily: Specifies time to start daily.

Command Default

The default value is start after 00:05:00 (After).

Modes

Y1731 configuration mode

Usage Guidelines

Use the no form of the command to delete the start configuration.

Examples

This example shows how to configure the start time.

device# configure terminal
device (config-cfm)# prtocol cfm
device (config-cfm)# y1731
device(config-cfm-y1731)# test-profile my_test_profile
device(config-cfm-y1731-test-profile-my_test_profile)# type delay-measurement
device(config-cfm-y1731-test-profile-my_test_profile)# tx-interval 60
device(config-cfm-y1731-test-profile-my_test_profile)# measurement-interval 30
device(config-cfm-y1731-test-profile-my_test_profile)# start at 00:00:00 daily