Displays status and statistics for the VXLAN overlay-gateway instance.
Privileged EXEC mode
Output includes the gateway name, the system-assigned gateway ID, source IP address, VRF, administration state, and number of tunnels associated. Additionally, the output displays the QoS TTL and DSCP modes for VxLAN tunnels in all supported platforms.
If you specify the gateway name, the gateway must already be configured.
To show the status for a gateway instance that is configured for Layer 2 extension with a loopback interface:
device# show overlay-gateway Overlay Gateway "GW1", ID 1 Type Layer2-Extension, Tunnel mode VXLAN IP address 10.10.10.1 (Loopback 10), Vrf default-vrf Admin state up QOS mode TTL: PIPE, DSCP: PIPE Number of tunnels 2 Packet count: RX 0 TX 0 Byte count : RX (NA) TX 0
To show statistics for the gateway instance:
device# show overlay-gateway statistics Gateway Name RX packets TX packets RX bytes TX bytes ==================== =============== =============== ========= ============== GW1 200000 10000 22227772 1110111
To display statistics for VLANs attached to the VXLAN gateway:
device# show overlay-gateway name GW1 vlan statistics Packets Bytes VLAN VNI Tx Rx Tx Rx ----------------------------------------------------- 10 1010 10000 200000 1110111 22227772 11 1011 2200 - 221334 - 21 1021 - 1 - 100 device# show overlay-gateway name test vlan statistics VLAN ID RX packets TX packets ========= ==================== ==================== 30 0 0 40 3696 3696