Configures BGP Prefix-Independent Convergence (PIC), providing a BGP next-hop and additional paths to the routing information base manager (RIBM) and forwarding information base (FIB) if applicable.
This feature is disabled by default.
Global configuration mode
Use the show running-config command to confirm the configuration. Backup paths are not displayed in the output.
Use the no form of this command to disable BGP PIC.
After enabling and disabling BGP PIC, use the clear ip bgp neighbor command to clear the configuration.
The following example configures BGP PIC.
device# configure terminal device(config)# prefix-independent-convergence