Configures a limit on the number of times the ingress LER tries to connect to the egress LER in a signaled LSP.
The command is disabled, by default.
MPLS policy mode.
The no form of the command disables the configuration.
When the connection is established, the retry counter is reset to zero.
MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.
In the following example, when the LSP needs to be established again, the ingress LER makes 20 attempts to establish a connection to the egress LER.
device # configure device(config)# router mpls device(config-router-mpls)# policy device(config-router-mpls-policy)# retry-limit 20