ingress-vlan-mapped-ve-counter

Enables displaying Layer 3 ingress statistics.

Syntax

no ingress-vlan-mapped-ve-counter

None

Global Configuration mode

This feature is only supported on SLX 9540 and SLX 9640 devices.

The Hardware Profile counter-profile-6 must be enabled. When not enabled, and when this command is executed, a reminder message is displayed.

The following must be kept in mind when enabling display of Layer 3 ingress statistics:

Ingress statistics will only be displayed where there is a one-to-one mapping between a port and a VLAN.
If the above criteria is not met, the ingress counter will always display the value Zero (0).
If the interface is a Port-Channel, only one Port-Channel must be associated with a VLAN.
Ingress statistics will not be displayed for Bridge Domains.

This example shows how to enable ingress VE counters.

SLX # configure terminal
SLX (config) # ingress-vlan-mapped-ve-counter
SLX (config) #

This example disables ingress VE counters.

SLX # configure terminal
SLX (config) # no ingress-vlan-mapped-ve-counter
SLX (config) #