Displays OSPF calculated routes.
Privileged EXEC mode
Use this command to display routes that OSPF calculated. You can display all routes or you can display information about a specific route. Tunnel next-hop is also displayed.
The following example displays all OSPF-calculated routes.
device# show ip ospf routes
OSPF Regular Routes 8:
Destination Mask Path_Cost Type2_Cost Path_Type
1.1.1.1 255.255.255.255 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
1.1.1.1 1.1.1.1 Network Valid 0 6
Paths Out_Port Next_Hop Type State
1 Lo 1 0.0.0.0 OSPF 0 0
Destination Mask Path_Cost Type2_Cost Path_Type
1.1.1.2 255.255.255.255 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
1.1.1.1 1.1.1.1 Network Valid 0 6
Paths Out_Port Next_Hop Type State
1 Lo 2 0.0.0.0 OSPF 0 0
Destination Mask Path_Cost Type2_Cost Path_Type
1.1.1.3 255.255.255.255 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
1.1.1.1 1.1.1.1 Network Valid 0 6
Paths Out_Port Next_Hop Type State
1 Lo 3 0.0.0.0 OSPF 0 0
Destination Mask Path_Cost Type2_Cost Path_Type
1.1.1.4 255.255.255.255 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
1.1.1.1 1.1.1.1 Network Valid 0 6
Paths Out_Port Next_Hop Type State
1 Lo 4 0.0.0.0 OSPF 0 0
Destination Mask Path_Cost Type2_Cost Path_Type
1.1.1.5 255.255.255.255 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
1.1.1.1 1.1.1.1 Network Valid 0 6
Paths Out_Port Next_Hop Type State
1 Lo 5 0.0.0.0 OSPF 0 0
Destination Mask Path_Cost Type2_Cost Path_Type
1.1.1.6 255.255.255.255 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
1.1.1.1 1.1.1.1 Network Valid 0 6
Paths Out_Port Next_Hop Type State
1 Lo 6 0.0.0.0 OSPF 0 0
Destination Mask Path_Cost Type2_Cost Path_Type
1.1.1.7 255.255.255.255 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
1.1.1.1 1.1.1.1 Network Valid 0 6
Paths Out_Port Next_Hop Type State
1 Lo 7 0.0.0.0 OSPF 0 0
Destination Mask Path_Cost Type2_Cost Path_Type
2.2.2.2 255.255.255.255 1 0 Intra
Adv_Router Link_State Dest_Type State Tag Flags
2.2.2.2 2.2.2.2 Asbr Valid 0 2
Paths Out_Port Next_Hop Type State
1 Lsp 1 2.2.2.2 OSPF ac 4a
2 Eth 0/5 30.1.1.2 OSPF 0 0