clear mpls lsp

Allows the user to reset normal LSPs. The user has the option of supplying the primary or secondary parameter for a normal LSP to reset only the primary or secondary path of the LSP.

Syntax

clear mpls lsp lsp_name [ primary | secondary ]

Parameters

lsp_name

Specifies the target LSP by name.

primary: Specifies that the primary LSP path associated with the lsp_name is reset and restarted.

secondary: Specifies that the secondary LSP path associated with the lsp_name is reset and restarted.

Modes

Privileged EXEC mode

Usage Guidelines

MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.

Examples

When the user resets an LSP with the clear mpls lsp command, the following information message is displayed.

"Disconnecting signaled LSP name"
"Connecting signaled LSP name"