Enables Management Heartbeat mode on the SLX device.
By default, Management Heartbeat mode is disabled. This command is used to explicitly enable this mode.
Management Heartbeat mode
The enable command must only be executed after setting the desired threshold and
action for the Management Heartbeat mode. This command can be executed immediately if you want to
retain the default values for threshold and action for this mode. When this command
is executed, the SLX device's Admin state becomes UP.
The no form of the command disables Management Heartbeat mode. However, the mode is not removed from the running-config.
The following example enables the Management Heartbeat mode.
SLX(config-management-heartbeat-manage) # enable
SLX(config-management-heartbeat-manage)# do show running-config management-heartbeat manager
management-heartbeat manager
enable
threshold-timer 1
action no-action
SLX(config-management-heartbeat-manage) #
The following example disables the Management Heartbeat mode.
SLX(config-management-heartbeat-manage) # no enable
SLX(config-management-heartbeat-manage)# do show running-config management-heartbeat manager
management-heartbeat manager
threshold-timer 1
action no-action
SLX(config-management-heartbeat-manage) #