show tunnel

Displays information pertaining to a tunnel interface.

Syntax

show tunnel [ tunnel-id | brief | replicator | statistics | status ]

show tunnel replicator

Parameters

tunnel-id: Specifies the tunnel ID.
brief: Displays brief information of tunnels.
count: Displays tunnels count.
dst-ip: Filters by tunnel destination IP address.
gre: Filters by GRE tunnels.
vxlan: Filters by vxlan tunnels.
mode: Filters by tunnel mode.
multicast: Displays multicast tunnels.
overlay-gateway: Filters by Overlay gateway name.
replicator: Displays tunnels to NSX replicators.
src-ip: Filters by tunnel source IP address.
statistics: Displays tunnel statistics.
status: Displays listing of tunnel id and states.
unicast: Displays uinicast tunnels.

Modes

Privileged EXEC Mode

Examples

This example display tunnel information.

SLX# show tunnel brief
Tunnel 61441, mode VXLAN, node-ids 1
Admin state up, Oper state up, unicast
Source IP 25.25.25.25 ( Loopback 2 ), Vrf default-vrf
Destination IP 30.30.30.30

Tunnel 61442, mode VXLAN, node-ids 1
Admin state up, Oper state up, multicast
Source IP 25.25.25.25 ( Loopback 2 ), Vrf default-vrf
Destination IP 239.0.0.1

SLX# show tunnel 61442
Tunnel 61442, mode VXLAN, node-ids 1
Ifindex 0x7c00f002, Admin state up, Oper state up, multicast
Overlay gateway "gw", ID 1
Source IP 25.25.25.25 ( Loopback 2 ), Vrf default-vrf
Destination IP 239.0.0.1
Configuration source PIM-SSM/MDT
MAC learning N/A
Tunnel QOS mode  TTL: PIPE, DSCP: PIPE
Active next hops on node 1: #here we list all outgoing ports(2 in this case)
IP: 10.3.6.3, Vrf: default-vrf
Egress L3 port: Ve 36, Outer SMAC: 609c.9f5a.3d15
Outer DMAC: 609c.9fde.7715, ctag: 36
BUM forwarder: yes

IP: 20.3.6.3, Vrf: default-vrf
Egress L3 port: Ve 37, Outer SMAC: 609c.9f5a.3e26

Outer DMAC: 609c.9fde.8815, ctag: 37
BUM forwarder: yes

Packet count: RX 0	TX 1066031994
Byte count : RX 0	TX 127923839280