ipv6 dhcp relay distance

Assigns the administrative distance to DHCPv6 Routes installed in RIB-IPv6 Route Table for the learned delegated prefixes on the interface.

Syntax

ipv6 dhcp relay distance distance-value
no ipv6 dhcp relay distance distance-value

Parameters

distance distance-value
The value of administrative distance configured. The default value is 10. Values can be in the range 1 - 255.

Modes

Interface Configuration Mode

Usage Guidelines

The no form of the command set the parameter to default value of 10.

Examples

The following example shows how to set the administrative distance value.

SLX(config)# interface Ve 5
SLX(config-Port-channel-1)# ipv6 dhcp relay distance 2
9038039-00 Rev AA