WiNG 7.X.X does not
support MeshConnex configuration on AP3xx, AP4xx, and AP5xx
model access points. This feature will be supported in future releases.
Refer to the WLAN/BSS Mappings
field to set or override WLAN BSSID assignments for an existing access point
deployment.
Use the ‘<‘ or ‘>‘
buttons to assign WLANs and mesh points to the available
BSSIDs.
Administrators can assign each WLAN its own BSSID. If using a
single-radio access point, there are 8 BSSIDs available. If using a
dual-radio access point there are 8 BSSIDs for the 802.11b/g/n radio and 8
BSSIDs for the 802.11a/n radio. Each supported access point model can
support up to 8 BSS IDs.
Administrators can assign each WLAN its own
BSSID. For dual-radio access points, there are sixteen BSSIDs for the
802.11b/g/n radio and sixteen BSSIDs for the 802.11a/n radio.
Click OK to save the
changes.
Click Reset to revert
to the last saved configuration.
