Disables sFlow statistical packet sampling and statistics gathering on a particular list of ports.
| port_list | Specifies a list of ports. |
Disabled.
This command disables sFlow on a particular list of ports. Once sFlow is disabled on a port, sampling and polling will stops. If sFlow is disabled globally, all sampling and polling stops
Use the following command to disable sFlow globally:
disable sflowThe following command disables sFlow sampling on port 3:1:
disable sflow ports 3:1
This command was first available in ExtremeXOS 11.0.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.