Disables one or more ports on the switch.
|
port_list |
Specifies one or more ports or slots and ports. |
|
all |
Specifies all ports on the switch. |
Enabled.
Use this command for security, administration, and troubleshooting purposes.
When a port is disabled, the link is brought down.
The following command disables ports 3, 5, and 12 through 15 on a stand-alone switch:
disable ports 3,5,12-15
The following command disables ports 3, 5, and 12 through 15 on a switch:
disable port 3,5,12-15
This command was first available in ExtremeXOS 10.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.