clear ospfv3 counters

clear ospfv3 counters {interfaces [[vlan | tunnel] all | {vlan} vlan-name | {tunnel} tunnel-name | area area-identifier] | virtual-link [all | {routerid} router-identifier {area} area-identifier]}

Description

Clears the OSPFv3 counters (statistics).

Syntax Description


all	Specifies all VLANs, tunnels, areas, neighbors, or virtual-links.
`vlan_name`	Specifies an IPv6 configured VLAN.
`tunnel_name`	Specifies an IPv6 tunnel.
`router-identifier`	Specifies a router identifier, a four-byte, dotted decimal number.
`area_identifier`	Specifies an OSPFv3 area, a four-byte, dotted decimal number.

Default

N/A.

Usage Guidelines

The global command clear counters also clears all OSPFv3 counters. This global command is the equivalent of clear ospfv3 counters for OSPFv3.

This command can be used to clear various OSPFv3 counters (Interface, Area, Virtual-Link, System etc.). The following is the list of various counters that would be reset to zero by this command:

Neighbor specific counters:
- Number of state changes.
- Number of events.
Interface/VLAN/Virtual-link/Tunnel specific counters:
- Hellos Rxed
- Hellos Txed
- DB Description Rxed
- DB Description Txed
- LSA Request Rxed
- LSA Request Txed
- LSA Update Rxed
- LSA Update Txed
- LSA Ack Rxed
- LSA Ack Txed
- In Discards

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS 32.6.1 Feature License Requirements document.