This command adds/removes a tenant VLAN or VMAN to a virtual network.
| vn_name | Alphanumeric string indentifying the Virtual Network to be configured. |
| add | Add a tenant VLAN to the Virtual Network. |
| delete | Delete a tenant VLAN from the Virtual Network. |
| vlan | Specifies VLAN. |
| vlan_name | Name of the tenant VLAN. |
| vman | Specifies VMAN. |
| vman_name | Name of the tenant VMAN. |
| dynamic |
Specifies configuring options for dynamically created VLANs. Adds dynamic VLAN‘s VID to a VNET. You can save this to the configuration and is it persistent across reboots. After reboot when a dynamic VLAN gets created with matching VID, the VLAN is internally applied to the VNET, so that you do not need to reconfigure this every time after reboot. |
| vlan | Add or delete a tenant VLAN to the Virtual Network |
| vlan_id | VLAN ID tag between 2 and 4,094. |
N/A.
Only a single VLAN/VMAN can be added to a virtual network.
The following example adds a VLAN to an existing virtual network:
# configure virtual-network my_virtual_network add vlan vlan100
The following example removes a VLAN from an existing virtual network:
# configure virtual-network my_virtual_network delete vlan vlan100
The following example adds dynamic VLANs with VID 100 to virtual network "my_virtual_network":
# configure virtual-network my_virtual_network add dynamic vlan 100
This command was first available in ExtremeXOS 21.1.
VMAN option added in ExtremeXOS 22.1.
Configuring dynamic VLANs as tenant VLANs was added in ExtremeXOS 30.3.
This command is supported on the ExtremeSwitching X465, X590, X695 series switches, and stacks with X465, X590, X695 slots only.