Configures the Fabric Attach state per port.
| ports | Specifies the port to configure. |
| port_list | Specifies a list of ports to configure. |
| all | Specifies configuring all ports in the system. |
| enable | Specifies enabling Fabric Attach settings (default). |
| disable | Specifies disabling Fabric Attach settings. |
All ports are configured to transmit and receive Fabric Attach attributed by default.
Use this command to enable or disable a port from adding the Fabric Attach TLVs to the LLDP packet.
The following example disables Fabric Attach port 25:
# configure fabric attach port 25 disable
This command was first available in ExtremeXOS 31.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.