show access-list counters process

show access-list counters process [snmp | telnet | ssh2 | http]

Description

Displays the access-list permit and deny statistics.

Syntax Description


snmp	Specifies statistics for SNMP.
telnet	Specifies statistics for Telnet.
ssh2	Specifies statistics for SSH2.
http	Specifies statistics for HTTP.

Default

N/A.

Usage Guidelines

Use this command to display the access-list permit and deny statistics. The permit and deny counters are updated automatically regardless of whether the ACL is configured to add counters.

Example

The following command displays permit and deny statistics for the SNMP application:

# sh access-list counter process snmp

Following is sample output for this command:

show access-list counter process snmp
=============================================================
Access-list 	Permit Packets 	Deny Packets
=============================================================
a1 						10 					0
a3 						 0 				 			25
a2 						 0 							6
=============================================================
Total Rules : 3

History

This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.