Clears the user-defined display string from one or more ports.
|
port_list |
Specifies one or more ports or slots and ports. |
N/A.
This command removes the display string that you configured using the configure ports display-string command.
The following command clears the user-defined display string from port 4 on a switch:
unconfigure ports 4 display-string
This command was first available in ExtremeXOS 10.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.