Displays the EEE statistics for the specified ports.
| ports | Specifies ports, or slots and ports, for which EEE information appears. |
| port_list | Optionally, specifies the list of ports, or slots and ports, for which EEE information appears. |
| no-refresh | Page-by-page display without continuous refresh. |
| refresh | Continuous refresh of output. |
| port-number | Displays port number instead of display string. |
N/A.
This command shows various EEE statistics for the specified ports.
The following command displays EEE information:
# show ports 6 eee no-refresh Port EEE Statistics Monitor Port Link EEE Rx Rx Rx Tx Tx Tx State Loc/Rem Events Seconds % Events Seconds % ================================================================================ 6 A E/E 56 841 >99 776 359 42 ================================================================================ The fields in the above output are described below: Tx/Rx duration – The total time the particular link was in Low power mode. This value is reset only after a "Clear counter" or a switch reboot Tx/Rx events – A counter that references the number of times the link transitioned to low-power mode. Tx/Rx % - The values denote the amount of time the link has been in Low power mode. The value is calculated by determining what fraction of the total time (the total time EEE has been active on that link) the link was in Low power mode.
This command was first available in ExtremeXOS 15.4.
This command is available on all platforms that support EEE.