Configures the redirect URL for Network Login.
| url | Specifies the redirect URL for Network Login. |
The redirect URL default value is “http://www.extremenetworks.com”; the default port value is 80.
In ISP mode, you can configure network login to be redirected to a base page after successful login using this command. If a RADIUS server is used for authentication, then base page redirection configured on the RADIUS server takes priority over this configuration.
You must configure a complete URL starting with http:// or https://
You can also configure a specific port location at a specific target URL location. For example, you can configure a target port 8080 at extremenetworks.com with the following command:
configure netlogin redirect-page "www.extremenetworks.com:8080"This command applies only to the web-based authentication mode of Network Login.
The following command configures the redirect URL as http://www.extremenetworks.com/support:
configure netlogin redirect-page http://www.extremenetworks.com/support
This command was first available in ExtremeXOS 11.1.
Support for HTTPS was introduced in ExtremeXOS 11.2.
Target port support was introduced in ExtremeXOS 12.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.