unconfigure qosprofile

unconfigure qosprofile {ports [port_list|all]}

Description

Returns the rate-shaping parameters for all QoS profiles on the specified ports to the default values.


`port_list`	Specifies the ports on which to unconfigure QoS profiles.
all	Specifies that this command applies to all ports on the device.

The default values for egress bandwidth on all supported platforms are:

The default values for egress priority and ingress QoS profiles differ by platform as described in the following sections.

The default values for the two default egress QoS profiles (QP1 and QP8) are:

None.

The following command resets the QoS profiles for all ports to default settings:

unconfigure qosprofile

This command was first available in ExtremeXOS 11.0.

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.

The egress and ports parameters are available only on all platforms.