configure cfm segment frame-loss mep

configure cfm segment segment_name frame-loss [add|delete] mep mep_id

Description

This command is used to add/delete the local MEP for a given CFM segment.

Syntax Description


`segment_name`	Alphanumeric string identifying the segment name.
frame-loss	Y.1731 Ethernet frame loss measurement.

Default

N/A.

Usage Guidelines

The MEP with the given MEP ID should already be created in the system. The domain and association for the segment should be configured before executing this command. If the domain and association are not configured, the command throws an error.

Configuring of local MEP is mandatory to start the Frame Loss measurements.

Example

configure cfm segment cs2  add mep 3
configure cfm segment cs2  delete mep 3

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.