Assigns the primary or secondary ethertype value to the specified ports.
| port_list | Specifies the list of ports to be configured. |
| primary | Assigns the primary ethertype value to the specified ports. |
| secondary | Assigns the secondary ethertype value to the specified ports. |
N/A.
None.
The following example configures port 2:1 to use the secondary ethertype:
configure port 2:1 ethertype secondary
This command was first available in ExtremeXOS 12.0.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.