This command is used to configure the number of consecutive measurements to be used to determine the availability status of a CFM segment.
|
segment_name |
Alphanumeric string identifying the segment name. |
|
frame-loss |
Y.1731 Ethernet frame loss measurement. |
10.
This configuration is optional.
configure cfm segment cs2 frame-loss consecutive 10
This command was first available in ExtremeXOS 15.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.