configure iparp retransmit-time

configure iparp {retransmit-time retransmit_time}

Description

Sets the value for Address Resolution Protocol (ARP) retransmit time


retransmit-time	Specifies setting the retransmit time.
`retransmit_time`	Sets the retransmit time value (range is 1–4,294,967 seconds or 1–4,294,967,295 milliseconds). Default is 1 second.
milliseconds	When setting the retransmit time value, specifies milliseconds as the time unit (range is 1–4,294,967,295).
seconds	When setting the retransmit time value, specifies seconds (range is 1–4,294,967) as the time unit (default).

The default setting for the retransmit time is 1 second. The default unit of measure is seconds.

The following example sets the retransmit time to 500,000 seconds:

configure iparp retransmit-time 500000 seconds

This command was first available in ExtremeXOS 11.1.

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.