This command configures the advertising status of the power available TLV on CDP ports.
| advertise | Specifies to send the TLV to neighbors. |
| no-advertise | Specifies not to send the TLV to neighbors. |
| port_list | Port list separated by a comma or - . |
No-advertise.
This command is for This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, and X620 series switches. switches.
The following example advertises the Power Available TLV on port 1:
configure cdp power-available advertise ports 1
configure cdp power-available no-advertise ports 1
This command was first available in ExtremeXOS 21.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.