Displays a detailed summary of notification log configuration and status, as well as global configuration and status.
| default | The default log. |
| name | Specifies the name of the log. |
| hex | Provide value in hexadecimal. |
| hex_name | Name of the log in hexadecimal. |
Disabled.
Use this command to display in detail the configuration and status of a notification log, as well as a summary of its contents.
The following example displays a detailed summary of nmslog2.
show snmp notification-log nmslog2
Name : nmslog2
Filter Profile : filter1
Entry Limit : 1500
Admin Status : Disabled
Oper Status : Admin Disabled
Entry Status : Active
Storage Type : Non Volatile
User : nmsuser2
Security Model : USM
Security Level : Authentication Privacy
Notifications Logged: 1500
Notifications Bumped: 300
Entries :
-------------------------------------------------------------------------------
Index Date Time Context Notification OID
-------------------------------------------------------------------------------
451 05/09/2013 07:00:01.17 1.3.6.1.6.3.1.1.5.1
452 05/09/2013 08:45:12.41 VR-Default 1.3.6.1.6.3.1.1.5.3
453 05/09/2013 09:10:05.32 VR-Default 1.3.6.1.6.3.1.1.5.4
-------------------------------------------------------------------------------
# show snmp notification-log default
Name : default
Filter Profile : test
Entry Limit : System Managed
Admin Status : Enabled
Oper Status : Operational
Entry Status : Active
Storage Type : Non Volatile
User : NA
Security Model : NA
Security Level : NA
Notifications Logged: 1
Notifications Bumped: 0
Entries :
-------------------------------------------------------------------------------
Index Date Time Context Notification OID
-------------------------------------------------------------------------------
1 06/11/2013 06:59:23.00 1.3.6.1.4.1.1916.0.15
2 06/11/2013 06:59:23.00 1.3.6.1.6.3.1.1.5.4
3 06/11/2013 06:59:25.00 1.3.6.1.6.3.1.1.5.4
-------------------------------------------------------------------------------
This command was first available in ExtremeXOS 15.5.
The default and hex keywords and hex_name variable were added in ExtremeXOS 15.6.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.