This command shows alias information collected by the Node Alias feature by the specified protocol. Node Alias discovers information about the end systems on a per-port basis. Information from packets from end systems, such as VLANID, source MAC address, source IP address, protocol, etc. are captured in a database that can be queried.
| nodealias | Node Alias feature that maps source IP address, MAC address, host name, and protocol on a per port basis. |
| protocol | Designates that you want to see only alias information discovered by a particular protocol (default is all protocols). |
| protocol_name | Specifies the protocol that you want to see alias information discovered by: ip, ipv6, ospf, bgp, bootps, bootpc, vrrp, dhcps, dhcpc, bpdu, udp, mdns, llmnr, or ssdp. |
If a specific protocol is not selected, information appears for all protocols. If specific port(s) are not selected, information appears for all ports.
The following example...
example in codeblock
This command was first available in ExtremeXOS 22.2.