Enables This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, and X620 series switches. power currently provided to all ports or to specified ports.
| all | Enables inline power to all ports on the switch. |
| port_list | Enables inline power to the specified ports. |
Enable.
Disabling inline power to a port immediately removes power to any connected PD. By default, inline power provided to all ports is enabled.
Disabling inline power using the disable inline-power command does not affect the data traffic traversing the port. And, disabling the port using the disable port command does not affect the inline power supplied to the port.
The following command enables inline power to ports 4 and 5 on a switch:
enable inline-power ports 4-5
This command was first available in ExtremeXOS 11.1.
This command is available on the PoE devices listed in Extreme Networks PoE Devices.