show rip

Description

Displays RIP specific configuration.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

None.

Example

The following command displays RIP specific configuration:

# show rip

The following is sample output from this command:

# show rip
RIP Routing      : Disabled          Operational status: Down
Split Horizon    : Enabled           Poison Reverse    : Enabled
Triggered Updates: Enabled           Aggregation       : Disabled
Update Interval  : 30                Route Timeout     : 180
Garbage Timeout  : 120               Router Alert      : Disabled
Originate Default: Disabled
Sys Import-Policy: None
Redistribute:
Protocol   Status    Cost Tag Policy
-----------------------------------------------------------
Direct     Disabled  0    0   none
Static     Disabled  0    0   none
OSPFIntra  Disabled  0    0   none
OSPFInter  Disabled  0    0   none
OSPFExt1   Disabled  0    0   none
OSPFExt2   Disabled  0    0   none
E-BGP      Disabled  0    0   none
I-BGP      Disabled  0    0   none
ISISL1     Disabled  0    0   none
ISISL2     Disabled  0    0   none
ISISL1Ext  Disabled  0    0   none
ISISL2Ext  Disabled  0    0   none

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS 32.6.1 Feature License Requirements document.