Configures L2PT profiles on service interfaces.
| vlan | Specifies the VLAN configuration. |
| vman | Specifies the VMAN configuration. |
| vlan_name | Specifies the VLAN name. |
| ports port_list | Specifies the port and port list separated by a comma ( , ) or dash ( - ). |
| profile | Specifies the L2PT profile for the ports. |
| none | Specifies that no L2PT profile should be bound to the ports (default). |
| profile_name | Specifies the L2PT profile to be bound to the ports. |
Disabled.
Use this command to configure L2PT profiles on service interfaces.
The following example binds my_l2pt_prof with ports 2 and 5 of VMAN cust1:
configure vman cust1 ports 2,5 l2pt profile my_l2pt_prof
The following example binds my_l2pt_prof with ports 2 and 5 of VMAN cust1. Port 5 is not a part of VMAN cust1:
configure vman cust1 ports 2,5 l2pt profile my_l2pt_prof Error: Port 5 is not part of the service.
This command was first available in ExtremeXOS 15.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.