Displays the current state of auto provision on the switch.
| vr_name | Specifies the virtual router. This may be VR-Default or VR-Mgmt only |
N/A.
Use this command to display the current state and the statistics of the auto provision feature on the switch.
The following command displays all information on the current state of auto provision:
show auto-provision
Following is sample output for the command when the auto provision is enabled. When “Enabled” the feature can be “In progress”, “Done”, or “Failed.”
(Auto-Provision) switch # show auto-provision --------------------------------------------------------------------------- VR-Name Auto-Provision Status Number of attempts --------------------------------------------------------------------------- VR-Default Enabled (In progress) 2 VR-Mgmt Enabled (In progress) 1 switch # show auto-provision --------------------------------------------------------------------------- VR-Name Auto-Provision Status Number of attempts --------------------------------------------------------------------------- VR-Default Enabled (Done) 0 VR-Mgmt Enabled (Done) 0
The following command displays information on the current state of auto provision on VR-Mgmt.
show auto-provision vr "VR-Mgmt"
Following is sample output for the command when auto provision is disabled:
switch # show auto-provision vr "VR-Mgmt" DHCP Auto-Provision : Disabled Number of attempts : 0
This command was first available in ExtremeXOS 12.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.