Creates a DHCP binding.
| ip_address | Specifies the IP address for the DHCP binding. |
| mac_address | Specifies the MAC address for the DHCP binding. |
| dynamic | Configuration options for dynamically created VLANs. |
| vlan_id | VLAN ID tag between 1 and 4,094. |
| vlan_name | Specifies the name of the VLAN for the DHCP binding. |
| server_port | Specifies the server port for the DHCP binding. |
| client_port | Specifies the client port for the DHCP binding. |
| seconds | Specifies the number of seconds for the lease. |
N/A.
This commands allows you to add a DHCP binding in order to re-create the bindings after reboot and to allow IP Security features to work with clients having static IP addresses.
Note
Setting the lease-time to 0 causes the DHCP binding to be static; in other words, it is not aged-out if no DHCP renew occurs. This is for use with clients using static IP addresses.
This command was first available in ExtremeXOS 12.1.
Dynamic VLAN and VLAN ID options added in ExtremeXOS 30.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.