Displays the status of the fans in the system.
| detail | The detail option is reserved for future use. |
N/A.
Use this command to view detailed information about the health of the fans.
This status information may be useful for your technical support representative if you have a network problem.
Note
For the ExtremeSwitching X435-24P-4S switches, you cannot view the fan speed.Fan information for bridge port extenders (BPEs) does not appear in this command. Use the show vpex bpe {slot slot_num} {environment} command instead.
The following command displays the status of the installed fans. If a fan is not installed, the state of the fan is Empty.
show fans
The following is sample output from an ExtremeSwitching switch:
FanTray information: State: Operational NumFan: 6 PartInfo: 0931G-00064 450237-00-05 Revision: 5.0 Fan-1: Operational at 14894 RPM Fan-2: Operational at 15360 RPM Fan-3: Operational at 15360 RPM Fan-4: Operational at 9637 RPM Fan-5: Operational at 9637 RPM Fan-6: Operational at 9637 RPM
The following is a sample output from a SummitStack:
FanTray-1 information: State: Operational NumFan: 1 Fan-1: Operational at 1000 RPM FanTray-2 information: State: Operational NumFan: 1 Fan-1: Operational at 1000 RPM FanTray-3 information: State: Operational NumFan: 1 Fan-1: Operational at 1000 RPM FanTray-4 information: State: Operational NumFan: 1 Fan-1: Operational at 1000 RPM FanTray-5 information: State: Empty FanTray-6 information: State: Empty FanTray-7 information: State: Empty FanTray-8 information: State: Empty
This command was first available in an ExtremeXOS 10.1.
Information about the current speed in RPM was added to the show fans output in ExtremeXOS 11.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.
For ExtremeSwitching X435 series switches, only the X435-24P-4S switches have a fan (internal).