configure cfm domain association end-point add group

configure cfm domain domain-name association association-name ports port-list end-point [up | down] add group group_name

Description

This command allows you to create a group for an existing local end-point.


`domain_name`	Enter the domain associated with the MA you are configuring.
`association_name`	IEEE 802.1ag or ITU-T Y.1731 association name.
`port_list`	Enter the port number you want to configure as either an UP or DOWN MEP.

N/A.

Use this command to add a group to the association.

configure cfm domain "MD1" association "MD1v1" ports 17 end-point down add group "eapsCfmGrp"

This command was first available in ExtremeXOS 15.2.

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.