Adds or deletes existing mirrors to a mirror MIB instance (specified by a control index) .
| mirror_name | Specifies a specific mirror name to add to or delete from a mirror MIB instance. |
| control_index |
Mirror destination control index (1–4). Also known as: etsysMirrorDestinationControlIndex. Each comprises a group of mirror names. |
| add | Specifies adding a mirror name to group referenced by a control index. |
| delete | Specifies deleting a mirror name from a group referenced by a control index. |
N/A.
To use policy-based mirroring, you need a mirror MIB instance (designated by a control index) with one or more associated mirrors to apply mirrors to a policy profile.
Only mirrors with a single 'to' port or remote-ip can be applied to a mirror MIB instance.
The following example adds existing mirror "mirror1" to mirror MIB instance with control index "2":
configure mirror 2 add mirror1
This command was first available in ExtremeXOS 30.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.