In the steady state when all the ports are enabled, the This command is available
on all Universal switches supported in this document. blocking rule prevents traffic coming from the ISC port to be forwarded to its
MLAG ports. So, in steady state, any unknown (unknown unicast/broadcast/multicast) traffic from
Switch-1 to Switch-2 over ISC-1 will not be flooded to “blue” and “orange” MLAG ports on
switch-2. However, since the “green” MLAG port on switch-2 does not correspond to ISC-1, the
traffic from ISC-1 will be forwarded to “green” MLAG port as shown in the following
illustration:
Traffic Flow
In steady state, the unknown traffic from Switch-3 to Switch-2 over ISC-2, will be blocked
to “green” MLAG ports. However, this traffic will be sent to “blue” and “orange” MLAG ports.
Traffic Flow (Unknown Traffic Switch-3 to Switch-2)
