ExtremeXOS allows configuring PIM on both This command is available
on all Universal switches supported in this document. peers. PIM adjacencies between each MLAG vlan are established across the
ISC link.
Note
PIM MLAG is supported only on default VR and is not
supported on user-created VRs.
The checkpoint PIM state between MLAG peers. This should include
all MLAG egresses.
You can verify that PIM functionality
for MLAG is present by issuing the following show command:
show pim cache {{detail} |
{state-refresh} {mlag-peer-info} {group_addr
{source_addr}}}
Additionally, the existing show pim cache command displays
ingress VLAN information for all MLAG peers.
The output of the command is shown below:
Index Dest Group Source InVlan Origin
[0001] 226.1.1.1 112.2.2.202 (S) fifthteen Sparse
Expires after 203 secs UpstNbr: 51.15.15.2
RP: 61.2.2.2 via 51.15.15.2 in fifthteen
Peer Ingress VLAN (ISC 1): 51.15.15.4/24 (Same)
EgressIfList = eight(0)(FW)(SM)(I) , five(0)(FW)(SM)(I)
PrunedIfList = ten(0)(SM)(AL)
