Clearing Fabric RSPAN (Mirror to I-SID) Statistics

Use the following procedure to clear Fabric RSPAN (Mirror to I-SID) statistics of packets mirrored into the specified mirroring I-SID or all mirroring I-SIDs on the BEB.

Procedure

Enter Global Configuration mode:

enable

configure terminal
Enter the following command:

clear isid-mirroring stats monitor-isid-offset WORD<1–1024>

Note

You must use this command on the Mirroring BEB to clear the statistics of packets mirrored into I-SID.

Example

Switch:1>enable
Switch:1#configure terminal

Clear all Fabric RSPAN statistics:

Switch:1(config)# clear isid-mirroring stats

Clear all Fabric RSPAN (Mirror to I-SID) statistics of packets mirrored into the specified mirroring I-SID

Switch:1(config)# clear isid-mirroring stats monitor-isid-offset 1

Variable Definitions

The following table defines parameters for the clear isid-mirroring stats command.


Variable	Value
monitor-isid-offset `WORD<1–1024>`	Specifies the offset ID that is mapped to the actual monitor I-SID where packets are mirrored. Monitor I-SID = base monitor I-SID + offset ID. The range of the `monitor-isid-offset` is 1 to 1000. The base monitor I-SID is 16776000.