Configure Polling Intervals
About this task
Enable and configure polling intervals to determine how frequently EDM polls for port and LED status changes or detects the hot swap of installed ports.
Procedure
- In the navigation pane, expand .
- Click Preference Setting.
- Enable polling or hot swap detection.
- Configure the frequency to poll the device.
- Click Apply.
Preference Setting field descriptions
Use the data in the following table to use the Preference Setting tab.
|
Name |
Description |
|---|---|
|
Enable |
Enables polling for port and LED status changes. The default is disabled. |
|
Poll Interval |
Specifies the polling interval, if enabled. The default is 60 seconds. |
|
Enable |
Detects the hot swap of installed ports. The default is disabled. |
|
Detection per Status Poll Intervals |
Specifies the number of poll intervals for detection, if enabled. The default is 2 intervals. |