Configuring Disks to be used by the Virtual Service
About this task
Perform the following procedure to configure the number of disks to be used by the virtual service configured on the switch.
Procedure
- In the navigation pane, expand the folders.
- Click Virtual Service.
- Click the Disks tab.
- Click Insert.
- In the ServName field, enter the virtual service name.
- In the Name field, enter the disk name.
- Optional: In the Size field, enter a value.
- Click Insert.
Disks Field Descriptions
Use data in the following table to use the Disks tab.
|
Name |
Description |
|---|---|
|
ServName |
Specifies the virtual service name. Note:
The specified name must match the virtual service name configured on the switch. |
|
Name |
Specifies the name of the disk used by the virtual service. |
|
Size |
Specifies the disk size (in Gigabytes). The default is 10 Gigabytes. |
|
SizeAllot |
Shows the disk size (in Megabytes) allocated to the virtual service. |
|
SizeAvailable |
Shows the available disk storage space (in Megabytes). |
|
SizeUsed |
Shows the amount of disk storage space (in Megabytes) used by the virtual service. |